Encoder Home Product Literature/Videos Encoder White Papers Admotec OEM Components Mounting Styles Optical vs. Magnetic Encoders vs. Resolvers Update Older Models Special Applications Encoder Glossary Encoder FAQ's Encoder Competitive Cross Reference Need an Encoder Fast? Help Me Choose an Encoder BC42-BC46-BC66 Brushless Tachometer Upgrade Distributors & Sales Representatives Login FEEDBACK CONTACT US E-Mail: Customer Help Desk Phone: (216) 642-4234 Fax: (216) 642-9743 E-Mail Your Order: Encoder Order Services

Help Me Choose an Avtron Encoder or Resolver!

Recommended Encoders

Resolvers

Select Your Application Conditions or Select Application

Models that best fit the application will be marked with a '►'

(Note: conditions will reset upon exit)

ATEX XP

Severe Duty

Heavy Duty

Mill Duty

Light Mill Duty

OEM Components*

Special application

Fill in Conditions Below or Click Here Chipper Crane & Hoist-Indoor Crane & Hoist-Outdoor Machine Tool-Cutting Machine Tool-Forming Material Handling-Conveying Material Handling-Stacker Metals-Blast Furnace Metals-BOF/BOP Vessel Tilt Metals-Billet/Bloom Casters Metals-Slab Caster Metals-Cold Line Metals-Hot Strip Line Metals-Pickling Line Metals-Slitting Mining-Conveying Mining-Hoist Mining-Shovel Packaging Machinery-Dry Packaging Machinery-Wet Paper-Converting Paper-Dry End Paper-Dryers Paper-Wet End Pipeline-Compressor Pulping Oil Drilling

Location

Indoors- Controlled Temp. Indoor But Unheated/Cooled Outdoor Application

Max Temperature

158°F / 70°C Maximum 176°F / 80°C Maximum 212°F / 100°C Maximum 239°F / 115°C Maximum 302°F / 150°C Maximum 446°F / 230°C Maximum Above 446°F / 230°C

Min Temperature

32°F / 0°C or warmer -4°F / -20°C Minimum -40°F / -40°C Minimum -49°F / -45°C Minimum -76°F / -60°C Minimum Below -76°F / -60°C

XP45

Moisture

No Water, less than 100% Humidity 100% Humidity/Dripping Water Sprays Fully Submersed Operation

Oil

No Cutting Oil Present Cutting Oil Vapor Present Cutting Oil Sprays

Dirt and Dust

Little or No Dirt/Dust Moderate Dust & Dirt, Chips Heavy Dirt/Dust/Metal Chips

Atmosphere

Non Explosive Atmosphere Explosive (ATEX Zone 1 or 2)

Service Duty

Light Service-little shock/vibration Normal Duty-modest vibration Heavy Duty-frequent shock & vibration Severe Duty-impacts, severe shock

Mounting Available

End of Shaft Mount only (tether) Through Shaft Mount required (tether) End of Shaft or Thru Shaft (tether) NEMA 56C Flange (4.5 in.) (coupled) 4.5 in. C-face Motor (5.88 in. bolt circle) 6.75 in. Motor C-Face (Reliance) 8.5 in. F/180C-Face Motor (7.88 in. bc) 12.5 in. C-Face Motor (10.88 in. bc) Foot/Base Mounting with Shaft Coupling Belt/Pulley Connected 115mm C-Face PY flange 2.0 in. Round Servo Flange with shaft coupling 2.06 in. Square Servo Flange with shaft coupling 2.5 in. Round Servo Flange with shaft coupling 2.675 in. Square Servo Flange with shaft coupling

Fill in Encoder Requirements-use TAB key to accept input

Shaft Size (US)

(in.)

(blank=metric)

Shaft Size (metric)

(mm)

RPM (maximum)

PPR (or = acc'rcy)

<-----Heavier Duty Encoders Lighter Duty Encoders---->

Resolver

# Isolated Outputs

1 2 3 4

Self-Diagnostics

No Diagnostics Full Diagnostics

Name:

*NOTE: OEM components

Email:

rely on mechanical

Phone:

protection as provided

Request:

by the OEM.

v. 12 April, 2010

All trademarks shown are the property of their respective owners. Information deemed accurate, but not guaranteed, but no warranty is implied or given.

Home | Contact | Site Map | Privacy Policy & Legal
Products | Support/Services | Training | News | How to Purchase | Event Calendar | About Us | Career Center

Copyright © 1996-2010 Avtron Industrial Automation, Inc. All rights reserved.