|
eliminates the problems associated
with slipping rotors of other types; it uses two cam (eccentric) head
screws. The screws are preloaded into the rotor; simply rotate them
(approximately 90°-180°) to fully
engage the shaft (4-6 ft-lbs) using a standard hex (Allen) wrench. Cam screw
rotors are available on
AV850,
AV56,
AV67,
AV85, and
AV115 THIN-LINE
II™
encoders.
Cam Screw Rotor Patent
#
7,485,997.
Cam Screw Rotor™ is a
trademark of Avtron. |
